Wine Box WE-1213 – Oak, Double Door

The Wine Box WE-1213 is produced by T.WING-PAK, a packaging manufacturer based in Nansha, Guangzhou that has built wooden boxes for watch, jewelry, wine and cigar brands for more than 19 years. It is a rigid cased wine gift box with a lined, compartmented interior, supplied for retail, gifting and OEM programmes, and it can be specified with your own finish, lining and branding from 50 to 100 pieces. Every unit is inspected before packing, and the finish, the lining material and the interior layout can all be adjusted to suit a particular product rather than being taken as fixed.

What the WE-1213 is for

A bottle given as a gift arrives in a paper carrier that says nothing about what is inside. The WE-1213 is a rigid wooden case holding a lined, compartmented interior, built so the presentation matches the contents – and it survives being carried, which a bag does not.

Wine is bought for occasions, and the outer packaging is part of the gesture. This wine gift box holds a lined, compartmented interior in a rigid wooden shell with a fitted interior, so the bottle travels safely and the gift reads as intentional rather than last-minute.

Design details

• Each grain is unique, with a sense of precipitation over time.
• It is not only a storage container but also a displayable wooden artwork.
• ️ Practical and Collectible Custom-made for WhistlePig 25 Years Single Malt Whiskey, with precise size, suitable for both storage and display.
• Natural oak material is moisture-proof and breathable, conducive to long-term storage of whiskey, a rare collection for whiskey lovers.
• Whether for personal collection or as a high-end gift, it can convey the ultimate pursuit of quality and time.

Wine Box specifications

Material, finish and build

The build is straightforward but not rushed. A stable engineered-wood body carries the exterior finish, the interior is lined and compartmented to the specified layout, and hardware is fitted and tested before packing. Each unit ships protected, because a scuffed corner undoes the whole point of a presentation case.

What separates a case that lasts from one that is returned is mostly the substrate and the hardware. The body is engineered wood, chosen for dimensional stability in heated rooms and humid climates; the lining is fitted rather than tacked; hinges and clasps are checked before the unit is boxed.

There is a commercial argument for spending on the box. Statista Market Insights puts 2025 global jewelry revenue at roughly USD 388.9 billion, led by China, India and the United States. Against numbers like those, packaging that customers keep rather than discard is cheap brand exposure, and it is entirely under the brand’s control.

Scale matters here. Global jewelry revenue reached an estimated USD 388.9 billion in 2025 according to Statista Market Insights, with the United States leading on per-capita spending. For brands competing in that market, the unboxing is the one part of the experience no competitor can dilute – and a case that stays in use keeps working after the sale.

Presentation, gifting and brand programmes

A box that gets thrown away is a cost; one that stays on a shelf is advertising. This one is specified with the second outcome in mind – rigid enough to protect the contents in transit, and finished well enough that the recipient keeps using it. For brands running gift-with-purchase or seasonal programmes, that is the practical argument for spending on the case rather than treating it as packing material.

Presentation packaging has one job beyond protection: it has to make the contents feel considered. A rigid case with a fitted, lined interior does that in a way a printed carton does not, and it continues doing it every time the box is opened afterwards. Corporate gifting buyers tend to judge on exactly this point – whether the recipient would be embarrassed to regift it, and whether it looks deliberate rather than incidental.

Who the WE-1213 suits

For wine brands, corporate gifting programmes and anyone presenting a bottle where the box matters as much as the contents. A lined, compartmented interior covers a single presentation bottle or a small set. Lay the bottle flat and keep it somewhere cool and dark.

Aimed at gifting: brand presentations, corporate orders, weddings and seasonal programmes. With a lined, compartmented interior it suits one bottle or a small pairing. It is presentation packaging, not long-term cellarage.

Where and how it is used

Carry it by the base, not the lid. Keep it out of direct sun and away from heat, and if the bottle will be stored rather than opened, move it to a proper wine fridge or a cool dark cupboard.

Use it for transport and presentation, then store the bottle horizontally in a cool, dark place. Avoid leaving a filled box standing in a warm room for days – heat is what damages wine fastest.

Care is simple: dust with a dry microfibre cloth, keep the piece out of prolonged direct sunlight, and avoid solvent cleaners on lacquered or lined surfaces. Wipe the interior occasionally and let anything damp dry fully before it goes back inside.

Care and handling

Maintenance is light. A dry cloth handles dust; solvents and household sprays are the main thing to avoid, since they attack both lacquer and many linings. Keep it away from radiators and strong sun, and let pieces dry before storing them.

Treat it like furniture rather than cardboard: dry cloth for dust, no solvents, no prolonged sun. Check hardware occasionally, and if the piece is being moved often, wrap it rather than letting it knock against other items in transit.

OEM and ODM customisation

This product comes out of T.WING-PAK’s Nansha, Guangzhou factory, which handles OEM and ODM work as standard. Changeable elements run from the exterior finish and the substrate beneath it through to the lining, the interior layout and the branding method, which can be hot foil, screen print, laser engraving or a metal badge. Because the packaging is made in the same plant, the shipping carton and the gift box can be specified as one unit. MOQ is 50 to 100 pieces by specification, sampling takes 7 days, and delivery runs 20 to 30 days after the sample is approved.

What to settle before ordering

Before specifying, decide four things. First the finish, and what sits under it. Second the lining, which does most of the perceived-quality work. Third the internal layout, because a case that does not hold the product properly fails at its only real job. Fourth the logo method, which depends on the surface – foil, screen print, laser and metal badges each suit different finishes. The 7-day sample exists to settle all four on real material.

Packaging and shipping

Each piece ships individually protected and void-filled so it cannot move in transit. Where a programme needs it, the outer packaging is developed alongside the product – rigid box, insert, print finish – which means the carton the customer receives and the case inside it are specified as one package rather than sourced from two suppliers.

Frequently asked questions

What is the minimum order quantity for a custom version?

MOQ runs from 50 to 100 pieces by specification. Sampling takes 7 days, and delivery is 20 to 30 days after the sample is signed off. Mixed finishes within one order are workable at the trial stage, which lets two options be compared before committing volume.

Can the finish, lining or interior layout be changed?

Yes – that is the core of the OEM programme. The exterior finish and the substrate beneath it, the lining material and colour, and the cushion or compartment geometry can all be specified. Changes are confirmed on a 7-day sample before bulk production starts, so the layout is signed off rather than assumed.

How is the item branded with our logo?

Logo options are hot foil, screen print, laser engraving and metal badges. The method is chosen against the surface finish, and the artwork is applied to the 7-day sample for approval before the bulk run begins.

How should it be cleaned and maintained?

Dust with a dry microfibre cloth and avoid solvents, which damage both lacquer and most linings. Keep it out of prolonged direct sunlight, and let anything damp dry fully before it goes back inside. Hardware needs nothing more than an occasional check.

Is it packed safely for shipping?

Units ship individually protected, with the exterior surfaces covered and the interior supported so nothing shifts in transit. For OEM orders the retail carton can be developed alongside the product so the shipping box and the presentation box match.

Bottom line

The decision is whether the box is part of the product or just transport. If it is part of the product, this case is built for it. Evaluate a single unit, or contact T.WING-PAK about a custom run with your own finish, lining, insert and branding: minimum 50 to 100 pieces, 7-day sampling, 20 to 30 days to delivery.